HLA

       PTO Adapter Three Point Hitch   Adds a hydraulic PTO and three point hitch to any skidsteer  Ideal for brush cutters & snow blowers etc  ...

         Regular Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½&...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Same great features as regular & heavy duty stone...

Regular Duty Universal Skidsteer Quick Fit Plate   3500 lbs capacity  Compatible to universal skidsteer attachments  Spring-loaded over-centre lever lock  Comes complete with new pins  ...

Regular Utility Grapple   Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR  Accommodates 4ft round bales  Works equally well on other materials such as manure, etc.  Opens up to 70...

Root Rake c/w Grapple   Two independent grapples for complete clamping on awkward loads  34" overall height when closed  Points are 1/2" thick, 400 Brinell high tensile steel  7-3/...

         Rotating Pallet Fork   Rotation is powered by a cylinder for smooth and contoured operation  Adjustable tines  Rotates 180° for a full dump to the left ...

 Round Bale Grapple (BG4000)   Designed for gentle handling of heavy wrapped silage bales  Lockable arms, one arm can be locked in a fixed position using pins so that all movement occurs in the o...

Rubber Feed Alley Scraper   Power angle  Easy on concrete or tiled floor mangers  24" high  Angles 45° either direction           ...

Scrap Grapple Bucket (Skidsteer)   Two independent grapples  1/4" material, 3/8" end plates  3/4 X 6 bevelled cutting edge  Ideal for awkward abrasive loads  31" overall ...

        Side Discharge Sand Bucket   Minimum 12 GPM required  Made of same material as sawdust bucket  Baffle brace and beater to improve flow and keep weight off belt  3...

        Side Discharge Sawdust Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Beater to prevent bridging  Discharge from either side of machine&...

        Side Discharge Straw/Lime Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Agitator prevents material bridging  Secondary metering drum regulat...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

Silage Facer - Bucket Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on bucket  400 Brinell high tensile steel teeth on drum  Dual drive motors  Heavy du...

Silage Facer - Frame Mount   Minimum 20 GPM required  Maximum flow 40 GPM  Facing drum mounted on a 4 ft frame  400 Brinell high tensile steel teeth on drum  Includes hose kit and flat-...

Silage Grapple Bucket   Heavy duty grapple integrated into the bucket design  Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face  3 X 16 cylind...

Single Arm Log Grapple   Removable log grapple for pallet forks  Clamps onto Class II or III fork frame (walk through guards only)  C/w Hydraulic cylinder           ...

Single Prong Bale Spear   Kverneland tine  Easy stabbing & removal  2000 lbs capacity @ 24" L.C.  Available with 39" or 49" tine  Two stabilizer tines  Approxima...

Single Prong Bucket Spear   Kverneland tine  2000 lbs capacity @ 24" L.C.  Adaptable to most buckets  No tools or bolts needed  Comes with chain & tightener  Approximate w...

Single Three Point Hitch Spear   Reese receiver / ball hitch (Ball hitch not included)  Fits both CAT I & II  Kverneland tine  2 stabilizer tines  2000 lbs capacity @ 24" L.C.&...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stabi...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allow...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-&frac1...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½"...

        Standard Front End Loader Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top...

        Standard Front End Loader Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top...

Standard Skidsteer Bucket & Skidsteer Grapple   Designed for use on skidsteers with limited clearance for grapple arms  Comes with 2-1/2" x 8" cylinders         ...

       Standard Skidsteer Bucket - HEAVY DUTY   HEAVY DUTY  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip&nbs...

        Standard Skidsteer Bucket - Long Lip (Heavy Duty)   1/4" material, 1/4" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  40" deep, 24...

      Standard Skidsteer Bucket - REGULAR DUTY   REGULAR DUTY  3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy du...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high streng...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 ...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23&q...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell hi...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkwar...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awk...

       Telescopic Handler Bucket - HIGH VOLUME   ¼" material, ¼" end plates  3/4 X 6 bevelled cutting edge  Reinforced top lip  47" deep, 41&...