All Inventory

        Low Profile Skidsteer Bucket c/w Digging Teeth - Heavy Duty   Heavy duty  ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  34" deep, 19" high...

        Produce Skidsteer Bucket   No sharp edges for gentle handling of produce  Screened back for better visibility  31" deep, 31" high  Made of the same material as standard bucket&n...

        High Volume Skidsteer Snow Bucket   3/16" material, ¼" end plates  ¾ X 4 bevelled cutting edge  Reinforced top lip  39" deep, 31" high  Screened back for better visibility...

       Standard (Skidsteer) Bucket & Regular Utility Grapple   Standard (Skidsteer) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½" x 8" cylinders    &nb...

       Telescopic Handler Bucket - EXTRA HIGH VOLUME   ¼" material, ¼" end plates  ¾ X 6 bevelled cutting edge  Reinforced top lip  55" deep, 46" high  ¾ x 8 bolt-on double beve...

      Standard (Front End Loader) Bucket & Regular Utility Grapple   Standard (Front End Loader) Bucket & Regular Utility Grapple  Opens up to 70"  Comes with 2-½" x 8" cylinders ...

        Side Discharge Straw/Lime Bucket   Minimum 12 GPM required  Hydraulic drive (coupled direct)  Agitator prevents material bridging  Secondary metering drum regulates flow onto the...

       Heavy Duty Dirt Blade   Ideal for skidsteers and front end loaders  Heavy duty construction with two angle cylinders  Reversible cutting edge  24" high mould board  Standard:...

       Skidsteer Grader   Push-pull design for grading in forward or reverse  Pneumatic swivel wheels on oscillating front axle  Extendable front axle bolster for better stability  Remov...

         Big Arm Backhoe for Skidsteer   QTach to most skidsteer loaders  6 ft digging depth  Hydraulic swing cylinder with 140° swing  Single electric selector valve with universal el...

        Optional Thumb for Big Arm Backhoe   Bolts on to Big Arm Backhoe  Three working positions  Manual positioning  Pins up against backhoe arm when not in use      &nb...

         900 LB Cap. - Light Duty Pallet Fork   1 3/16" x 3 1/8" Class II hook type solid fork lift tines  900 lbs capacity @ 21" L.C.  Sliding adjustable  Tines can be locked in any po...

         1,200 LB Cap. - Light Duty Pallet Fork   1 3/16" x 3 1/8" Class II hook type solid fork lift tines  1200 lbs capacity @ 24" L.C.  Sliding adjustable  Tines can be locked in any...

         2,000 LB Cap. - Heavy Duty Pallet Fork   1½” x 3 1/8” Class II hook type solid fork lift tines  2000 lbs capacity @ 24" L.C.  C/w guard  50" wide carriage    &nb...

         4,200 LB Cap. - Heavy Duty Pallet Fork   1-3/8” x 4” Class II hook type solid fork lift tines  4200 lbs capacity @ 20" L.C.  C/w guard  50" wide carriage  Sliding adju...

        5,500 LB Cap. - Heavy Duty Pallet Fork   1½” x 4” Class II hook type solid fork lift tines  5500 lbs capacity @24" L.C.  C/w guard  50" wide carriage  Sliding adjustabl...

        7,500 LB Cap. - Heavy Duty Pallet Fork   1¾” x 5” Class III hook type solid fork lift tines  7500 lbs capacity @ 24" L.C.  C/w guard  50" wide carriage  Sliding adjusta...

        10,000 LB Cap. - Heavy Duty Pallet Fork   2" x 6" Class III hook type solid fork lift tines  10,000 lbs capacity @ 24" L.C.  C/w guard  50" wide carriage  Sliding adjustable...

        Bucket Pallet Fork   Adaptable to most buckets  No tools or bolts needed           ...

       Heavy Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½" x 8" cylinders      ...

       Manure Fork & Regular Utility Grapple   Opens up to 70"  Comes with 2-½"x 8" cylinders           ...

      Manure Fork (Cranked Kverneland Tine)   LDFE 32” Conus I cranked Kverneland tines (28” useable length)  MFE 35" Conus I cranked Kverneland tines (31" useable length)  Superior penet...

      Pallet Fork Tine Extensions (Nursery)   Fits HD42 & HD55 forks  Optional tine extensions with angled pad for gentle clamping of root balls etc.  NOTE: Tine extensions reduce the capa...

       Pallet Fork Tine Extensions (Standard)   Fits HD42 & HD55 forks  NOTE: Tine extensions reduce the capacity of your pallet fork.           ...

       Power Tilting Pallet Fork   Rotation is powered by a cylinder for smooth operation  Adjustable tines  Levels 45 degrees each way  Great for uneven job sites      &n...

      Power Tine Pallet Fork   Hydraulic sliding tines  Ideal for clamping (such as a root ball in nurseries etc.)  Hyd. powered tines move in and out equally         ...

         Regular Duty Stone Fork & Regular Utility Grapple   Same great features as regular & heavy duty stone forks  Opens up to 70"  Comes with 2-½" x 8" cylinders    &n...

         Rotating Pallet Fork   Rotation is powered by a cylinder for smooth and contoured operation  Adjustable tines  Rotates 180° for a full dump to the left        &...

        Side Shift Pallet Fork   Hydraulic carriage side shift  16" travel (8" right or left)  Adjustable tines           ...

      Stone Fork (Cranked Kverneland Tine)   39" Conus II cranked Kverneland tines (32" useable length)  Tines installed on 4" centres  Ruggedly built  Heavy duty back guard with 3 lb exp...

       Stone Fork (Landscape with Power Rake)   ¾" shaft diameter  1-¾" spacing between tines  Points are ½" thick, 400 Brinell high strength steel  32" high  35-½" deep  I...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY   HEAVY DUTY  1-¾" shaft diameter  2-¾" spacing between tines  Points are ¾" thick, 400 Brinell high strength steel  31" high&nb...

   Stone Fork (Retainer Style Tine) COMPACT DUTY   1" Shaft diameter  2-½" spacing between tines  Points are ⅝" thick, 400 Brinell high strength steel  23" high  35" deep  200...

   Stone Fork (Retainer Style Tine) REGULAR DUTY   REGULAR DUTY  1-¼" shaft diameter  2-½" spacing between tines  Points are 5/8" thick, 400 Brinell high strength steel  23" high&nb...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY   HEAVY DUTY - UP TO 9500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkward ab...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY   REGULAR DUTY - UP TO 5500 LB CAPACITY  Two independent grapples  Ideal for brush & rock clean up  Ideal for awkward...

  Compact Brush Grapple w/ Electric Actuator   Opens to 38" wide from ground to point of grapple  Tine tips and grapple tips are AR400 material  Tine spacing 6" on center  Single grapple ar...

 Round Bale Grapple (BG4000)   Designed for gentle handling of heavy wrapped silage bales  Lockable arms, one arm can be locked in a fixed position using pins so that all movement occurs in the other...

Square Bale Grapple (BG6000)   Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter  Opens up to 84"  Approximate weight: 570...

Square Bale Squeeze (BG7000)   86" extended – 30" Retracted  Arms are 50” long, 20” tall  2-½" x 28" stroke cylinder  Slim brace arm design allows for tight stacking of bales  Ap...